|
|
 |
CUSTOMER SIGN IN |
 |
|
 |
|||||||||||
P4 Flexitank Standard Operating Procedure
Containers must be clean and free from from sharp edges or rough patches 
Lining of corrugated paper before fitting the flexitank
Placing the flexitank right in the middle of the container. to open up the flexitank as per the folds 
Positioning the laminated bulkhead across the coitainer door 
Fitting of metal bars with cable ties on laminated bulkhead 
Full view from inside container after fitting of bulkhead is completed 
Warning labels to be pasted on left hand container door. This will give clear instructions on safety precautions Container is now ready for loading operation
Remove the protection cover from the stubby 
Connecting the stubby and hose for loading 
Container is now ready for loading. Please take note that loading procedure using a stubby is optional upon request 
A complete view of a loaded container 
Recommended pump used for loading and discharging operation Container is now ready for discharging operation
Discharging operation in progress
Discharging procedure is complete 
Removing of bulkhead is in progress. Upon the removal of bulkhead, the remaining residue can still be squeezed out as shown in the next slide 
Folding the flexitank outwards and at the same time pressing the remaining residue in the flexitank 
Upon the completion of the discharging, flexitank is being folded accordingly Flexitank being packaged after the completion of the discharging operation.
 |
|
||||||||||||
 |
||
| Copyright © 2009 JMP HoldingsPrivacy Policy | Contact | Home | Sitemap |
